Sorry, you need to enable JavaScript to visit this website.

Developing Zynq®-7000 All Programmable SoC Hardware (Vivado 2015.2 and 2016.2)

This class demonstrates the hardware and software flows for creating your first Xilinx Zynq®-7000 All Programmable SoC design. Through a series of instructor presentations (based on 2013.3) and hands-on labs ( 2015.2 and 2016.2), hardware and firmware engineers will learn all the required steps for creating a Zynq-7000 All Programmable SoC design on either ZedBoard™ or MicroZed™. It covers the architecture of the ARM® Cortex™-A9 processing system (PS) and the integration of programmable logic (PL). The course also details the individual components that comprise the PS, I/O peripherals, clocking, interrupt, AXI interfaces and memory controllers. Emphasis is placed on efficient PL-to-PS interfacing including integration of custom PL-based IP.  To complete the design cycle, the critical steps of hardware debugging techniques are also shown.

Pre-requisites:

  • Completion of the “Developing Zynq-7000 All Programmable SoC Software” course or equivalent knowledge is required.
  • Familiarity with the Zynq-7000 All Programmable SoC architecture is also recommended.
  • Laptop/workstation with ZedBoardMicroZed kit, or PicoZed + PicoZed FMC Carrier Card V2. PicoZed is only compatible with the 2016.2 lab version.

 

      Download the labs (Vivado 2015.2)

        Download the labs (Vivado 2016.2)

       

 

 

Table of Contents

Chapter-1 Zynq Overview View
Chapter-2 Xilinx Embedded Tool Flow View
Lab-1 Building a Basic Zynq Design
Chapter-3 Zynq Processor Overview View
Lab-2 PS Configuration Part 1 & Hello World
Chapter-4 Zynq Peripherals View
Lab-3 PS Configuration Part 2 – MIO Peripherals
Chapter-5 The Power of TCL View
Lab-4 Using TCL in Vivado Embedded Designs
Chapter-6 Adding Programmable Logic Peripherals View
Lab-5 Adding a PL Peripheral
Chapter-7 Zynq Processing System DMA Controller View
Lab-6 Improving Data flow between PL and PS utilizing PS DMA
Chapter-8 Creating Custom IP View
Lab-7 Adding Custom IP to Vivado® IP Catalog
Chapter-9 Vivado Hardware Manager View
Lab-8 Hardware Debugging Zynq®-7000 All Programmable SoC Designs
Chapter-10 Next Steps View